Reebok RBTL69211.0 User Manual Page 1

USER’S MANUAL CAUTIONRead all precautions and instruc-tions in this manual before using this equipment. Keep this manual for future reference.Model

104833177C66. Set the Console Base (83) face down on a soft surface to avoid scratching the Console Base. Remove the two screws (C) from the Puls

118. IMPORTANT: To avoid damaging the Pulse Crossbar (31), do not use power tools and do not overtighten the #10 x 3/4" Screws (13). Orient

1210. Set the console assembly on the Handrails (71). Make sure that no wires are pinched. Insert the excess Upright Wire (70) behind the Console Fr

13148181802314. Attach a Wheel (81) to the Base (80) with a 3/8" x 2 1/2" Bolt (2) and a 3/8" Nut (3). Do not over-tighten the Nut; t

14OPERATION AND ADJUSTMENTHOW TO CONNECT THE POWER CORDUse a Surge SuppressorYour treadmill, like other electronic equipment, can be damaged by sudden

15ETRB69211(RBTL69211)FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec-t

16HOW TO TURN ON THE POWERIMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem-perature before you turn on

175. Follow your progress with the displays. The matrix—When you select the manual mode, the matrix will display a track that rep-resents 1/4 mile

18HOW TO USE AN ONBOARD WORKOUT1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 16. 2. Select an onboard workout. To

19HOW TO USE THE WEIGHT LOSS CENTER1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 16. 2. Select a weight loss workou

2WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20HOW TO USE AN IFIT WORKOUTTo purchase iFit cards at any time, go to www.iFit.com or call the telephone number on the front cover of this manual. iFi

21THE INFORMATION MODEThe console features an information mode that keeps track of the total distance that the walking belt has moved and the total nu

22 HOW TO FOLD THE TREADMILLTo avoid damaging the treadmill, adjust the incline to the lowest position before you fold the treadmill. Then, remove the

23Most treadmill problems can be solved by follow-ing the simple steps below. Find the symptom that applies, and follow the steps listed. If further a

24 Lower the treadmill. Next, remove the three indicated #8 x 3/4" Screws (6). Carefully slide the Motor Hood (57) off. Locate the Reed Switc

25SYMPTOM: The walking belt is off-center or slips when walked ona. If the walking belt is off-center, first remove the key and UNPLUG THE POWER COR

26EXERCISE GUIDELINESThese guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consu

27 Key No. Qty. Description Key No. Qty. Description 1 4 #8 x 1/2" Ground Screw 2 2 3/8" x 2 1/2" Bolt 3 4 3/8" Nu

2851272524244141423839504914343727234726422826281426325404344124648481945303030303012116165654261952531919323619323232191933030303030363636EXPLODED DR

2991676561636215859581820216022657664212117172021186666686666186661818EXPLODED DRAWING BModel No. RBTL69211.0 R0412A

3IMPORTANT PRECAUTIONS1. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or perso

30807815771578772813333281336779797777337935337935707345765445728871698471131311111078108742989319999667571EXPLODED DRAWING CModel No. RBTL69211.0 R04

315555906919083859999299966666693878666826666EXPLODED DRAWING DModel No. RBTL69211.0 R0412A

Part No. 326786 R0412A Printed in USA © 2012 ICON IP, Inc.ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in wor

420. Never leave the treadmill unattended while it is running. Always remove the key, press the power switch into the off position (see the drawing on

5Thank you for selecting the new REEBOK® COMPETITOR RT 6.0 treadmill. The COMPETITOR RT 6.0 treadmill provides an impressive selection of features des

6PART IDENTIFICATION CHARTUse the drawings below to identify small parts used for assembly. The number in parentheses below each draw-ing is the key n

7• Assembly requires two persons.• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materialsuntil

82. Identify the Left Upright (75), which is marked "Left." Have a second person hold the Left Upright near the Base (80). See the inset

94. Identify the Left and Right Base Covers (73, 74), which are marked either “Left” and “Right” or “L” and “R.” Slide the Left and Right Base Cov