Reebok Competitor Rt 5.1 Treadmill User Manual download pdf (Page 12)

13. Set the console assembly on the Left Handrail

(84) and the Right Handrail (85). Be careful not

to pinch any wires. Insert the excess Upright

Wire (not shown) into the Right Handrail.

Attach the console assembly with six #8 x 1/2"

Screws (16), four 1/4" x 1/2" Screws (3), four

5/16" Flat Washers (108), and four 5/16" Star

Washers (13) as shown. Start all ten Screws

and then tighten them.

See step 9. Fully tighten the four 5/16" x 1"

Screws (5) and the two 5/16" x 1 1/4" Bolts (2).

Console

Assembly

108

12. With the help of a second person, hold the con-

sole assembly near the Right Handrail (85).

Connect the Upright Wire (88) to the console

wire. See the inset drawing. The connectors

should slide together easily and snap into

place. If they do not, turn one connector and try

again. IF YOU DO NOT CONNECT THE CON-

NECTORS PROPERLY, THE CONSOLE MAY

BECOME DAMAGED WHEN YOU TURN ON

THE POWER. Remove the wire tie from the

Upright Wire.

Console

Assembly

Console

Wire

Tie

Console

Wire

108

1 ... 11 12 13 ... 36

No comments

Reebok Competitor Rt 5.1 Treadmill User Manual Page 12