Reebok Crosswalk Rt 5.0 Treadmill User Manual

Serial NumberDecalModel No. RBTL61010.0Serial No.Write the serial number in the spaceabove for reference.CAUTIONRead all precautions and instruc-tions

107. Identify the Left Base Cover (88) and the RightBase Cover (91). Slide the Left Base Cover ontothe Left Upright (84). Slide the Right Base Coveron

119. Insert the end of a Crosswalk Arm (121) into thehole in the top of a resistance mechanism.Make sure that the bend in the CrosswalkArm is position

1212. IMPORTANT: To avoid damaging theCrossbar (107), do not use power tools anddo not overtighten the #10 x 3/4" Screws (2).Orient the Crossbar

1314. Set the console assembly on the Left and RightHandrails (82, 83). Be careful not to pinch anywires. Insert the excess Upright Wire (87) intothe

1415. Hold the Right Upright Cover (86) against theconsole assembly. Align the holes in the RightUpright Cover with the holes in the Right Upright(85)

15OPERATION AND ADJUSTMENTTHE PRE-LUBRICATED WALKING BELTYour treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Nev

16FEATURES OF THE CONSOLEThe treadmill console offers an impressive array offeatures designed to make your workouts more effec-tive and enjoyable. Whe

17HOW TO TURN ON THE POWERIMPORTANT: If the treadmill has been exposed tocold temperatures, allow it to warm to room tem-perature before turning on th

184. Change the incline of the treadmill as desired.To change the incline of the treadmill, press theIncline increase or decrease button or one of the

196. Measure your heart rate if desired.Before using the handgrip pulse sensor, removethe sheets of plastic from the metal contacts on thepulse bar. I

TABLE OF CONTENTSWARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20HOW TO USE AN ONBOARD WORKOUT1. Insert the key into the console.See HOW TO TURN ON THE POWER on page 17.2. Select an onboard workout.To select an on

21If the speed or incline setting is too high or too lowat any time during the workout, you can manuallyoverride the setting by pressing the Speed orI

22When you select an iFit Live workout, the displaywill show the duration of the workout, the distanceyou will walk or run, and the approximate number

23THE INFORMATION MODEThe console features an information mode that keepstrack of treadmill information and allows you to person-alize console setting

24HOW TO USE THE CROSSWALK ARMSAs you walk on the treadmill, you can hold thehandrails or use the crosswalk arms. To exercise yourarms, shoulders, and

25HOW TO FOLD THE TREADMILLTo avoid damaging the treadmill, adjust the inclineto the lowest position before you fold the treadmill.Then, remove the ke

26TROUBLESHOOTINGMost treadmill problems can be solved by following the simple steps below. Find the symptom thatapplies, and follow the steps listed.

27Remove the three #8 x 3/4" Screws (1) and care-fully pivot the Motor Hood (62) off.Locate the Reed Switch (73) and the Magnet (47)on the left s

28PROBLEM: The walking belt is off-center or slips when walked onSOLUTION: a. If the walking belt is off-center, first remove thekey and UNPLUG THE PO

29These guidelines will help you to plan your exerciseprogram. For detailed exercise information, obtain areputable book or consult your physician. Re

31. Before beginning any exercise program, con-sult your physician. This is especially impor-tant for persons over age 35 or persons withpre-existing

30PART LIST—Model No. RBTL61010.0 R1110ATo locate the parts listed below, see the EXPLODED DRAWING near the end of this manual.Key No. Qty. Descriptio

31Key No. Qty. Description Key No. Qty. Description101 1 Console102 1 Console Frame103 1 Tray104 1 5/32" Hex Key105 2 Console Clamp106 1 Console

8651202121343334332832324343304530303039403636364745463644414948543960555656465859615718102423181919202430303030284218421810432EXPLODED DRAWING A—Mode

151515157418733737371112222282869707168626476757265162828316766777978161663112113282828111110EXPLODED DRAWING B—Model No. RBTL61010.0 R1110A33

120116111517114117122121190590590596968273589898595929294905942526353597988710108938786838281818038381133441313273584711711141111889114911711511611411

99531108103101121071252291021061111112211111111001105105505311111091712317100135EXPLODED DRAWING D—Model No. RBTL61010.0 R1110A

Part No. 306311 R1110A Printed in USA © 2010 ICON IP, Inc.ORDERING REPLACEMENT PARTSTo order replacement parts, please see the front cover of this man

420. Never leave the treadmill unattended while itis running. Always remove the key, unplugthe power cord, and press the power switchinto the off posi

5Thank you for selecting the revolutionary REEBOK®CROSSWALK RT 5.0 treadmill. The CROSSWALK RT5.0 treadmill offers an impressive selection of features

6ASSEMBLYTo hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.Assembly requires two persons. Set the treadmill in a

72. Attach a Wheel (96) to the Base (95) with a 3/8"x 2" Bolt (8) and a 3/8" Nut (10). Do not over-tighten the Nut; the Wheel must turn

84. Hold the Right Upright (85) against the Base(95). Be careful not to pinch the UprightWire (87). Insert two 3/8" x 4" Bolts (7) with two3

6. Hold the Left Upright (84) against the Base (95).Insert two 3/8" x 4" Bolts (7) with two 3/8" StarWashers (11) and a 3/8" x 1 1