Reebok RBTL76009.0 User Manual

Serial NumberDecalModel No. RBTL76009.0Serial No.Write the serial number in the spaceabove for reference.CAUTIONRead all precautions and instruc-tions

108. Slide the Right Upright Cover (86) onto theRight Upright (85). Remove the tie from thebracket on the Right Handrail (83). If necessary,press the

1111. Firmly tighten the four 5/16" x 1" Flat HeadPatch Bolts (3) and the two 5/16" x 1" PatchBolts (4) (only one side is shown).W

13. Hold the Right Upright Cover (86) against theconsole assembly. Align the holes in the RightUpright Cover with the holes in the Right Upright(85).

13OPERATION AND ADJUSTMENTTHE PRE-LUBRICATED WALKING BELTYour treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Nev

14FEATURES OF THE CONSOLEThe treadmill console offers a selection of featuresdesigned to make your workouts more effective andenjoyable. When the manu

15HOW TO TURN ON THE POWERIMPORTANT: If the treadmill has been exposed tocold temperatures, allow it to warm to room tem-perature before turning on th

164. Change the incline of the treadmill as desired.To change the incline of the treadmill, press theIncline increase and decrease buttons or one ofth

17HOW TO USE A WEIGHT LOSS WORKOUT1. Insert the key into the console.See HOW TO TURN ON THE POWER on page 15.2. Select one of the weight loss workouts

18HOW TO USE AN IFIT WORKOUTTo purchase iFit cards at any time, go to www.iFit.comor call the telephone number on the front cover of thismanual. iFit

19THE INFORMATION MODEThe console features an information mode that keepstrack of treadmill usage information. The informationmode also allows you to

TABLE OF CONTENTSWARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20HOW TO FOLD AND MOVE THE TREADMILLHOW TO FOLD THE TREADMILL FOR STORAGEBefore folding the treadmill, adjust the incline to thelowest position. If yo

21HOW TO LOWER THE TREADMILL FOR USE1. Hold the upper end of the treadmill with your right hand.Pull the latch knob to the left and hold it. It may be

22TROUBLESHOOTINGMost treadmill problems can be solved by following the simple steps below. Find the symptom thatapplies, and follow the steps listed.

23Remove the three #8 x 3/4" Screws (1) and care-fully pivot the Motor Hood (62) off.Locate the Reed Switch (73) and the Magnet (47)on the left s

24PROBLEM: The walking belt is off-center or slips when walked onSOLUTION: a. If the walking belt is off-center, first remove thekey and UNPLUG THE PO

25These guidelines will help you to plan your exerciseprogram. For detailed exercise information, obtain areputable book or consult your physician. Re

26PART LIST—Model No. RBTL76009.0 R0110ATo locate the parts listed below, see the EXPLODED DRAWING near the end of this manual.Key No. Qty. Descriptio

27Key No. Qty. Description Key No. Qty. Description101 1 Console102 1 Console Frame103 1 Accessory Tray104 1 5/32" Hex Key105 2 Console Clamp106

8652512021213433343328323243433045303030394036363647454636444149485439605556564658596150571810242318191920243030303028104424228EXPLODED DRAWING A—Mode

15151515741873373737111172222282869707168626476757265162828316766777978161663EXPLODED DRAWING B—Model No. RBTL76009.0 R0110A29

31. Before beginning any exercise program, con-sult your physician. This is especially impor-tant for persons over age 35 or persons withpre-existing

90590590596968711711273589898595928891921494905942526353597988710108931487868382818180383811334413139927358430EXPLODED DRAWING C—Model No. RBTL76009.0

9953110810310112107121092910210611111122111711110017105105110531717171131EXPLODED DRAWING D—Model No. RBTL76009.0 R0110A

Part No. 292810 R0110A Printed in USA © 2010 ICON IP, Inc.ORDERING REPLACEMENT PARTSTo order replacement parts, please see the front cover of this man

420. Never leave the treadmill unattended while itis running. Always remove the key, unplugthe power cord, and switch the reset/off cir-cuit breaker t

5Thank you for selecting the revolutionary REEBOK®V8.90 treadmill. The V8.90 treadmill offers an impres-sive selection of features designed to make yo

6ASSEMBLYTo hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.Assembly requires two persons. Set the treadmill in a

72. See the inset drawing. Cut the plastic tie nearthe Upright Wire (87).Attach a Wheel (96) to the Base (95) with a 3/8"x 2" Bolt (8) and a

84. Hold a Bolt Spacer (14) inside the lower end ofthe Right Upright (85). Insert a 3/8" x 4" PatchBolt (7) with a 3/8" Star Washer (11

6. Hold a Bolt Spacer (14) inside the lower end ofthe Left Upright (84). Insert a 3/8" x 4" PatchBolt (7) with a 3/8" Star Washer (11)